KREG SHELF PIN JIG (KMA3200)

The Kreg Shelf Pin Jig enables you to drllill accurate aligned shelf pin holes quickly. The Kreg Shelf Pin Jig is made out of high impact ABS plastic.
 The best part of the Kreg Shelf Pin Jig are the drill guides made out of steel making them very durable.  The jig has storage on the back for the driil bit with its stop collar.
The fence can be mounted on either side of the jig, slides and locks into position easily.  This gives you a 1" or 2" drill from the egde.  If your holes need to be bigger than 2" from the edge than you don't need the fence.
Its easy to set drill depth.  Place the drill and stop collar in storage slot by sliding the bit forward til the shoulder of the brad point contacts with the Jig. Then just secure the depth with the allen key. 
If you are planning on a big project you may consider two jigs, can be joined together with the jig extender.  However you can just reposition the jig by sliding the jig down so the top hole is over the last hole you drilled and away you go.

The Kreg KMA3200 is an easy tool to use.  The Kreg Shelf Pin Jig can drill shelf pin holes with great accuracy saving you time and effort.