Showing posts with label canoe paddle. Show all posts
Showing posts with label canoe paddle. Show all posts

Thursday, January 14, 2016

Drying Rack for a Canoe Paddle and other things.



 I often have several small projects on the go at one time and usually the bottle neck in the process is drying glue or finishes.  When I make a small wood carving, recently like little owls or pocket trucks and boats I screw a gimlet into the item and use the gimlet as a handle. When I hang the small projects to dry, all around the shop I  and sometimes forget them until they are knocked  down. After an embarrassingly long time I just made a proper rack, with hooks upon which those things can now dry.


 This is a low tech solution, but aren't the low tech solutions often really good.  I drilled five holes into a 24 inch board, threaded sash cord through the holes and tied them off.
  Next I salvaged 5 six inch pieces of left over wire from the wiring job on the weekend and made hooks.

 
  Finally  I screwed the rack to the ceiling where it will be obvious but not in the way. Hanging from the rack drying right now is the kid sized canoe paddle I am making for my Grand daughter.
the paddle is 30 inches long and
 features Tova's favourite animal.



 




   I made the paddle from cedar which isn't very strong and since I needed to wood burn the owl into the paddle I killed two birds with one stone by reinforcing the the neck with ash and burning on the lighter wood.

  This paddle will spend plenty of time wet  so I glued the ash on with water proof glue and plan to give the paddle 4 or 5 coats of spar varnish.

  As a foot note, when I made this paddle I used my random orbital sander for much of the shaping but my files and rasps did at least half of the work, if not more. Every shop should have a flat file with a safe side, if possible, and a round file too. Take the time to put handles on your files, it makes them much easier to use.


cheers, ianw

Friday, September 4, 2015

Three Shop Projects

I have a photograph that shows life in my shop almost perfectly. Last Friday I was working on bicycles, because I can, and this Friday I have worked on a canoe paddle, two boxes for repair and another polissoir. 


    10,000 Villages in Hamilton provides me with a steady stream of wooden boxes that need adjustment or outright repair. It is amazing how many tools I use to repair these boxes. I use needle files, rasps, planes and chisels on nearly every box. On the larger of the two boxes I used my Rockwell Bench Jaw, this bench fixture has become a 'go to' bench vise for many tasks of this sort. 

Rockwell BenchJaw Hands-Free Bench Vise RK9006

  The other thing on that canoe paddle is a polissoir, 6 1/4 inches long by 1 1/4 inch in diameter.


 This polissoir is made from new broom straw and bound with waxed thread which has its knots glued solid. After shaping the ends I soaked them with pure bee's wax. If anyone is interested in buying a polissoir I am selling them for $20.00 PLUS shipping costs. I can be contacted at walwoodwork@gmail.com to make arrangements, put polissoir in the re:line so your inquiry doesn't get lost.

 cheers, ianw


Wednesday, September 2, 2015

Kid sized canoe paddle


  My kids in Sweden recently bought a cottage (stuga in Swedish) on an island in a neighbouring lake and so travel forth and back to their place in a motor boat or canoe.  My two year old grand daughter wants to help paddle, and so needs a mini canoe paddle with which to do the job.

 I have never made a canoe paddle and certainly never imagined making one kiddie sized.  However I didn't let either of those things stop me. 

 Making one paddle is not really very time effective, so I made a couple of compromises.  To make a really good, commercially saleable product it would have to be perfectly symmetrical in every way. Symmetry is comforting to the eye and more comfortable in the paddlers hand.  Since this paddle is going to be used by a three years old when she is paddling next season I was not too concerned about the paddle having the most efficient shape or grip. To make a fine paddle I would have had to spend time creating a fine pattern from plywood so that I could use a pattern cutting bit on my router table to shape the paddle. To make one paddle I chose not to spend the time and effort to make a pattern that would only be used once. I also decided that light weight was more important than strength so I chose white cedar from which to make the paddle.

  My approach was to draw a pattern on card board, cut it out and trace it on a piece of cedar board. I cut the paddle out on my band saw,and so the result was acceptable but not perfect.  I chose cedar because it is pretty good in wet environments. Were I making a larger paddle I would look to either re-enforce the shaft or make the whole thing from a different wood.   


                                              
  Once the paddle is cut out I abandoned my work shop for a table in our garage. Cedar dust is very hard on the lungs and so I took the sanding part of this project outside into the summer breeze.


How its Made: Canoe Paddles.


Check out how the real paddle makers do it.

cheers, ianw